Z90 Spading machine

HP 45-90   KW 33-66

The Z90 can be used for tractors with up to a 90 HP maximum power range. Spading machines are known for solving deep soil processing problems in conditions that would be prohibitive for other tools. These machines eliminate bottom soil hardpan (deep layer of compacted soil), thus improving the deep circulation of water and aeration of the soil. Since these machines do not require any traction efforts, they can be used without issue in wet ground conditions and on sloping ground. They also reduce erosion by keeping the size of the clods at a medium level. The Z90 is a highly reliable machine, tested in the most difficult conditions by experienced and demanding users. A complete oil bath is used for crank gear lubrication, guaranteeing long life of the bearings and avoiding tedious daily greasing operations. The sides of the machines and safety devices have been completely redesigned to improve the flow of soil during operation and limit the risk of clogging. The maximum working depth is about 35 cm.

Technical specifications and standard equipment

  • maximum horsepower: 90 HP (44 KW)
  • PTO: 4-speed gearbox for 540 rpm
  • oil bath lubrication and waterproof seal system
  • 3-point hitch cat.1, from 150 up to 200
  • 3-point hitch cat.2, from 220 up to 250
  • rear tailgate with leveling flap
  • working depth adjustment by skids
  • spades 225×175 mm (mod. 150-180-200-220-250) 225×205 mm (mod. 165)
  • drive shaft with clutch
    • S.6 L=829 mm tractor side 1”3/8 Z=6 (per mod. 150, 165, 180)
    • S.8 L=806 mm tractor side 1”3/8 Z=6 (per mod. 200, 220, 250)
  • safety devices

On request

  • 4-speed gearbox for 540 rpm with rear PTO (only models 220-250)
  • Reinforced 3-point hitch (≥ model 220)
  • Set of 2 front wheels Ø 300 mm (except for model 150)
  • Set of 2 front wheels Ø 500 mm (models 220-250) with reinforced 3-point hitch
  • Rear rake (replacing tailgate)
  • Foot stand kit
  • Lower PTO for models 220 and 250

Ideal for:

  • Working with medium sized tractors
  • Cultivating heavy and sticky soil
  • Working soil in depth
  • Tillling soil in orchards and vineyards
  • Breaking up the hardest soil
  • Eliminating soil compacting
  • Burying abundant crop residue
  • Carrying equipment on the roads without risks

* All standard machines are supplied with low position PTO gearboxes (to fit tractors with PTO heights up to 65 cm)
** All standard machines supplied with high position PTO gearboxes (to fit tractors with PTO heights between 65 and 85 cm)

Previous
« Y70
 
Next
G190 »

Request for information

Fill out the form to ask for information on the product pages

Information request