PEGASUS SE · Side mulcher with outer gearbox

HP 55-110 KW 40-81
New

Side mulcher model PEGASUS SE can boast a high level of versatility. It is suitable for tractors up to 100 HP and can be used for a variety of applications thanks to its specific adjustment to the tractor. The gearbox fitted outside the side transmission allows an extra sideshift of the cutting body, however keeping an adequate angle for the cardan shaft.

The double arm (parallelogram type) allows the machine to work from central to an off-set position of 113 cm to the centre-line of the tractor. Side side-adjustment is controlled by hydraulic ram PEGASUS SE can easily achieve areas where the tractor cannot, due to limited height or the presence of obstacles. An hydraulic controlled tilt mechanism allows the cutting body to work in non horizontal position, thus being suitable to work along road shoulders or ditches. The vertical position ranges from 90° to –65°, therefore being suitable for any application in farming and greens. The Pegasus series is also equipped with a safety system which also works as self-alignment, and it allows the machine to lift itself up when hitting an obstacle or adapting to the profile of the soil. Pegasus series can also be blocked in the vertical position (90°) for road transport. This machine is suitable for maintenance of ditches, road shoulders, reed, meadows and greens.

Technical specifications

  • Maximum horsepower: 100HP (73 KW)
  • PTO: 540 rpm 1 speed rotor: 2278 rpm
  • Side transmission with 4 belts
  • 3 point hitch CAT. 2 with self-levelling knuckle and mechanical shock absorber
  • Front and upper counterblades
  • Rear roller ø194
  • Side-shif and tilt (angle) adjustments with hydraulic rams
  • Gearbox with freewheel safety device
  • Outer gearbox for extra side-shift
  • Rotor (pipe ø 168 mm) with flat hammers
  • Foot stand
  • Double shielded box frame
  • Cardan shaft without safety device
  • Side-skids

OPTIONAL ACCESSORIES

• Y blades

• Cardan shaft with wide-angle yoke

• Anti-shock device with hydraulic return on the side-shift ram

• Side skids protections to minimize wear

  1. (required)
  2. (required)
  4. (required)
  6. According to italian privacy laws you must give us your consent to use your personal information. Before you give us your consent to use the information you are sending, please read our privacy policy.

    Privacy Policy

    Celli S.p.A. collects and utilises the personal information entered by users of our website in accordance with the provisions of the Italian Law Decree no. 196/2003 (“Codice in materia di protezione dei dati personali”, Act on the protection of personal information).

    The company in charge of data processing is:

    Celli S.p.A.
    Via Masetti 32
    47100 Forlì – Italia

    To enforce your rights in accordance with art. 7 of the above mentioned Act (Codice in materia di protezione dei dati personali), to obtain additional information regarding your personal data collection and utilisation procedures, or for any inquiries and suggestions, please contact Celli S.p.A. directly.

 

cforms contact form by delicious:days

 

Ideal to:

  • Work with medium sized tractors
  • Mulch grass and prunings

Technical specifications

The most important technical specifications of CELLI mulchers MIZAR/F, MIZAR/S are:

Replaceable counter-blades (except TCA, SIRIO, VEGA and LIBRA)
Counter-blades are very important when requiring a good mulching, therefore it is important they can be replaced once worn-out.

Working width up to 450 cm (TS/P folding model)
The folding model allow an exceptional yield per hour thus also sorting out the problem of road transport.

Versatility

All models are available both in fixed and in side-shift version (with the exception of TCA, TS/P and LIBRA)
This allows more versatility and also it allows to work very close to trees even with large foliage. (SIRIO, MIZAR/F, MIZAR/S)

Rich choice of tools
CELLI can offer a wide range of tools (9 different types of tools between blades and hammers) thus allowing the maximum flexibility and also meeting any type of mulching.

TS/S model is one of the few straw chopper available on the market
The peculiarity of this unit is that it can be offset, thus working more effectively the required strip of soil.

Internal freewheel on all models
All Celli models are supplied with gearbox with internal freewheel safety device which limits excessive torque when the tractor PTO is disengaged. This extra torque during PTO disengagement is rather usual with earlier tractor models.

Hydraulic adjustment of rear tailgates
Maintenance and check up time are eased thanks to the hydraulic adjustment of rear tailgates (optional for TS/F, TS/S and standard for TS/P models)

Commercial points

A growing range
Celli managed to increase the range from 4 to 14 models, and it is still growing with the objective to offer an appropriate answer to each specific mulching need.

High quality components
We have selected the best materials and components, which have been fully tested, so that we can offer a complete mulcher range with the same quality level as the other Celli machines.

Great experience in the production of large professional units
Celli can now be considered a market leader in the production of folding soil tillage equipment. Celli engineers have largely drawn from this experience to design the TS/P folding mulcher.