LIBRA · Side mulcher

HP 40-70 KW 29-51

Side mulcher

The side mulcher LIBRA has in its versatility the main selling point.
Suitable for medium horsepower tractors, it can be operated in a variety of working conditions thanks to the geometry of its hitch.
The main parallelogram, dual-arm hitching system allows the unit to work from a central position out to a 75 cm shifted position from the tractor centre. The movement is hydraulically controlled. The LIBRA can easlily reach areas where the tractor operation  is difficult because of the limited height or the presence of obstacles.
A tilting mechanism, hydraulically controlled, allows also to operate the mulching head at an angle, which is ideal for working along roadsides or river banks. From 90° (vertical) to 65° beyond the flat position, the range of working
set-ups is wide enough to solve most of the operating problems in agriculture and green areas maintenance.

A mechanical shock-absorber which acts also as a self-levelling device, allows the mulcher to avoid damages if it hits an obstacle and at the same time helps following the land profile smoothly.
The LIBRA can be locked in a vertical position for transport.

This unit is suitable for cutting grass, prunings and wood up to
3-4 cm maximum of diameter.

Standard equipment includes

  • 540 rpm PTO
  • Category II three point hitch
  • Double fixed counterblades
  • Central gearbox with safety free-wheel
  • Rear roller
  • Fully hydraulic adjustment
  • Hammers
  • Side skids

On request

  • Wide angle driveshaft
  • Y shaped blades
  • Square blades
  • Toothed blades.
  1. (required)
  2. (required)
  4. (required)
  6. According to italian privacy laws you must give us your consent to use your personal information. Before you give us your consent to use the information you are sending, please read our privacy policy.

    Privacy Policy

    Celli S.p.A. collects and utilises the personal information entered by users of our website in accordance with the provisions of the Italian Law Decree no. 196/2003 (“Codice in materia di protezione dei dati personali”, Act on the protection of personal information).

    The company in charge of data processing is:

    Celli S.p.A.
    Via Masetti 32
    47100 Forlì – Italia

    To enforce your rights in accordance with art. 7 of the above mentioned Act (Codice in materia di protezione dei dati personali), to obtain additional information regarding your personal data collection and utilisation procedures, or for any inquiries and suggestions, please contact Celli S.p.A. directly.

 

cforms contact form by delicious:days

 

Ideal to:

  • Cut grass
  • Cut grass on slopes
  • Work with medium sized tractors

Technical specifications

The most important technical specifications of CELLI mulchers MIZAR/F, MIZAR/S are:

Replaceable counter-blades (except TCA, SIRIO, VEGA and LIBRA)
Counter-blades are very important when requiring a good mulching, therefore it is important they can be replaced once worn-out.

Working width up to 450 cm (TS/P folding model)
The folding model allow an exceptional yield per hour thus also sorting out the problem of road transport.

Versatility

All models are available both in fixed and in side-shift version (with the exception of TCA, TS/P and LIBRA)
This allows more versatility and also it allows to work very close to trees even with large foliage. (SIRIO, MIZAR/F, MIZAR/S)

Rich choice of tools
CELLI can offer a wide range of tools (9 different types of tools between blades and hammers) thus allowing the maximum flexibility and also meeting any type of mulching.

TS/S model is one of the few straw chopper available on the market
The peculiarity of this unit is that it can be offset, thus working more effectively the required strip of soil.

Internal freewheel on all models
All Celli models are supplied with gearbox with internal freewheel safety device which limits excessive torque when the tractor PTO is disengaged. This extra torque during PTO disengagement is rather usual with earlier tractor models.

Hydraulic adjustment of rear tailgates
Maintenance and check up time are eased thanks to the hydraulic adjustment of rear tailgates (optional for TS/F, TS/S and standard for TS/P models)

Commercial points

A growing range
Celli managed to increase the range from 4 to 14 models, and it is still growing with the objective to offer an appropriate answer to each specific mulching need.

High quality components
We have selected the best materials and components, which have been fully tested, so that we can offer a complete mulcher range with the same quality level as the other Celli machines.

Great experience in the production of large professional units
Celli can now be considered a market leader in the production of folding soil tillage equipment. Celli engineers have largely drawn from this experience to design the TS/P folding mulcher.